First-timer's Guide to Installing a New Shower Unit

First-timer's Guide to Installing a New Shower Unit

Blog Article

Book Now

Everyone seems to have his or her own idea about How to Build a Shower Enclosure for Your DIY Bathroom.

An effective shower installation requires careful planning and a lot of work. Most of the times, you will certainly require to do 3 kinds of tasks: framing walls, mounting the plumbing, and finishing wall surfaces.

Various Sorts Of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower unit can be attached to the bathroom faucet as per your demand, and also the water temperature can be readjusted by means of the taps. Push-on mixers are cheap and also extremely easy to install. Nonetheless, although the hose connection is easy, it is quickly removed. Furthermore, it is troublesome to adjust the temperature.

Bath/Shower Mixer: The pipe as well as spray of this type of shower are combined with a bathroom mixer faucet, and the temperature can be adjusted with the bath taps. It is an extremely affordable option and no additional plumbing is entailed. However, the bath/shower mixers likewise deal with inconvenient temperature level control options.

Handbook Mixer: The hose as well as spray of a hand-operated mixer shower system belong of the wall system and also the hot and cold water products are linked to a solitary shutoff The temperature and stress of the water are controlled with either one or a selection of handles (in more expensive showers). Although temperature control is a lot easier in hand-operated mixer types, they are much more costly than the formerly stated mixers. They additionally need added plumbing of hot and cold supply of water pipes.

Thermostatic Mixer: The hose pipe as well as spray of this shower type are a part of the wall device and the cold and hot water supplies are attached to a single valve below also. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from coming to be also warm. One of the biggest benefits of a thermostatic mixer shower type consists of practical temperature level control. Nevertheless, it is the most costly of the different mixer choices.

Power Shower: A power shower is a single system containing an effective electric pump that is capable of altering both the water stress as well as temperature. This kind of shower can be fitted if there is water system from a cold water cistern and also a hot water cyndrical tube. A power shower makes the modification of both stress as well as temperature very easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is provided by a combination central heating boiler under keys pressure.

Electric Shower: An electrical shower is plumbed into a mains cold water supply and also it heats up the water electrically. It is very important to keep in mind that for this shower kind to be installed, the mains stress requires to be at least 0.7 kg/sq cm (10lb/sq in). The system allows the temperature and also stress to be adjusted via a handle. Versions with temperature stabilisers are better as they stay unaffected by other taps in other places in operation within the house. A major downside of electric showers is that the control handle only permits the choice of high temperatures at less stress, or reduced temperature levels at a greater stress. This is problematic in the winter season when the spray is often weak and the mains water is colder. Nevertheless, this problem is tackled in some versions which are readily available with a winter/summer setup.

Most Usual Errors

Violating or overlooking regional code restrictions.

Making use of pipes that are also little.

Attaching copper to galvanized without utilizing a brass or dielectric fitting in between the two.

Not utilizing tape or pipeline compound at threaded joints.

Uneven your fixtures when mounting them.

Not installing an air space loading for fixtures.

Reducing supply stub outs too short to mount the shutoff valves onto after the finished wall is in location.

Not effectively aligning tubing right into installations or stop valves. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will trigger a leakage.).

When transforming the water back on in your home, always run the outside hose pipe valve or flush your bathrooms to hemorrhage dust and air from the lines. This debris can cause issues in your sink faucets as well as other plumbing trim.

Preparation.

Firstly, you should choose the type of shower that you wish to install. It is essential to ascertain whether the picked shower can handling particular systems and also can control a risk-free level of water with the boiler. Most shower systems nowadays are created to be flexible to different water pressures (such as kept hot water and cool keys).
It is likewise crucial to take into consideration the water stress and the preparation of the piping and water drainage for the shower.

Technique.

Depending upon the sort of shower you desire to install, the shower head need to either be fitted in order to avoid its contact with the water in the bath below or the base tray, or it has to have a check valve.
Prior to starting, it is advisable to note the settings of the shower head and also control, as well as to intend the pipe-work involved. Furthermore, the drain system to get rid of the waste water will require to be intended. Both positions of the cable television course and also the shower button will certainly also need to be thought about if a rapid or electrical shower unit is being set up.
Utilize the direction guide offered with the shower system to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is important to remove the water. In order to shield the pipelines, they need to be offered a water resistant covering and also fitted with separating shutoffs. The pipes can after that be hidden into the wall surface and also glued over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Connect the primary shower control to the pipes that will be supplying the water (This might call for a female screw string adapter).
Reconnect the water system and test the pipelines for any type of leakages, as some might require tightening.
If you are installing an electric shower, bear in mind to switch off the electricity supply before making any kind of electrical links. When these links have actually been made (there must be support within the instruction manual), the power supply can be switched over back on.

Adjusting Water Pressure to Match Your Shower.

The cold water reservoir can be lifted to a better elevation (often as low as 150mm (6inches)) by fitting a solid wood assistance under it - perhaps made up of struts as well as blockboards. If you pick this choice, the primary and also distribution pipes will also have to be raised to fulfill the new elevation of the reservoir.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be attached into the power supply in order to run.

Piping as well as Drainage.

It is best to utilize 15mm size supply pipelines, and make the runs to the shower as brief and also straight as possible so as to keep maximum pressure and also minimise warm loss. Furthermore, by minimising making use of elbows for pipe edges, you can reduce the resistance in the circulation of the supply of water. You can attain this by flexing the pipes instead.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed reading our excerpt on How to Install a Shower Enclosure . Many thanks for finding the time to read through our piece of content. Are you aware of somebody who is looking into the topic? Take a moment to promote it. Thank-you for your time invested reading it.

Call Today

Report this page